Hurricane natural vertical vane ventilation

For over 25 years, the Hurricane® range of vertical vane natural ventilation technology has been built to endure the tough conditions and operating environments. Bradford Ventilation products are designed, engineered and manufactured at its ISO9001 accredited facility in Seven Hills, Australia.

Hurricane was the original industrial ventilator to incorporate Edmond's patented vertical vane technology.

Bradford Ventilation designed a heavy duty bearing system to improve ventilator performance and durability in high wind speeds. This bearing system prevents ingress of fine dust particles and fumes from harsh environmental conditions.

Good air circulation promotes the exhaust of hot and stale air and can prevent humidity build up. A well designed ventilator must be weather proof to prevent water ingress into the building whilst maintaining its performance. Bradford Ventilation's vertical vane Hurricane range of ventilators have been performance tested to Australian Standard AS4740: Performance of Natural Ventilators to determine flow rate capacities and been wind load tested to 195km/h and tested for rain penetration to Australian Standard AS2428.1: Dynamic Wind Load & Rain Penetration Testing.

Testing at University of Technology Sydney have shown an improved co-efficient of discharge (Cd) compared to similar sized traditional spherical vents.

In addition to the improved Cd performance, vertical vane technology have distinct benefits over traditional vents as they provide:

  • Improved torque at low wind speed
  • Better protection against rain - water ingress protected
  • Larger exhaust opening
  • Greater "sail" area to drive the turbine

Exported and used around the globe with varying conditions and applications, it has been used by some of the world’s largest corporations including:

  • General Electric (Canada, USA, Brazil, Chile, Vietnam)
  • Honda (India)
  • Toyota (Oman)
  • Umicore (Bulgaria)
  • Daewoo (Romania)
  • Qantas maintenance terminal (Australia)
  • Harvey Norman (Australia)

Hurricane are installed in over 300 schools and colleague roof throughout Australia.

Features and benefits
Applications
Accessories
Colour
Special Variations

Special variations for specific applications:

  • Fire-Rated (FR) option meets the fire resistant test to AS 1668.1-1998. The use of ventilation and air conditioning in buildings, Part 1: Fire and smoke control in mult-compartment buildings Section 4.8. Smoke-Spill fan
  • Bush Fire Rated (BFR) option for buildings in Bushfire Prone Vegetation Category 1 areas. It is designed to comply with the Deemed to Satisfy provisions of AS3959
  • Corrosion Resistant (S2) option for water reservoirs or oxidative or slightly acidic (non-caustic) environments
  • Heavy Industrial (HI) option with polyolefin coating for corrosive environments
Specifications
Contact our technical team
Specialist team:
(02) 8824 0444
Email:
sales@csr.com.au
Case studies

Browse our commercial & industrial case studies to see how Bradford Ventilation can help your project

EcoPower

A hybrid ventilator that works to ensure a constant supply of fresh air for commercial industrial buildings.