EcoPower true-hybrid ventilation technology

The comfort and safety levels of building occupants are a growing concern in modern-well sealed business. The traditional means of exhausting heat or fumes from a building was either; mechanical ventilation, which has high and ongoing cost associated with it. Or turbine ventilation - though it has low ongoing cost, its performance is dependent on natural conditions such as wind.

However, Bradford Ventilation designed, engineered and manufactured EcoPower® , the world's first true-hybrid™  ventilator in Australia. EcoPower incorporates the leading design of Hurricane® vertical vane turbine ventilator with a high efficiency electronically commutated (EC) motor for reliability and on-demand peak performance, when required. 

Bradford Ventilation is an ISO 9001:2008 certified manufacturer and the world leader in turbine ventilator technology. 

 

EcoPower is designed for flexibility with three control options to choose from, perfect for a variety of applications: 

 1. Air iQ Customised Control options:

EcoPower with Air iQ is integrated with in-built temperature & humidity response for effective, energy efficient flow control.

The customised control options can be fully customised to your specification or, you can choose from 3 factory pre-set options.

Customised Options

1. Customised temperature only control

2. Customised humidity only control

3. Customised temperature & humidity control

or

Factory pre-set options

1. Temperature only control

2. Humidity only control

3. Temperature & humidity control

 

2. Building Management Controls:

EcoPower can be controlled with a 0-10V external input, for example a Building Management System (BMS).

  

3. EcoPower Standard controls:

On = EcoPower runs at 100% speed

Off = EcoPower runs in natural mode

Features and Benefit
How EcoPower works
Application
Accessories
Colour
Specification
Specification
The roof ventilators shall be CSR Bradford Ventilation's EcoPower 100mm (150mm, 400mm,600mm or 900mm) with no fan blade to impede airflow, and which can be driven by ambient wind/stack action and/or motor. The hybrid ventilator must have an e.c.motor directly connected between the stator and turbine such that the airflow under wind power is not impeded. The dBA @3m must be less than 54 and energy efficient 40m³/hr/watt or better.
Warranty

Product Suitability

Always check product suitability and limitations of use prior to selection - refer to the Product Technical Statement (PTS) available online.
Contact our technical team
Specialist team:
(02) 8824 0444
Email:
sales@csr.com.au
Case studies

Browse our commercial & industrial case studies to see how Bradford Ventilation can help your project

Hurricane

Hurricane is designed and built to endure tough conditions and operating environments.